Charging generator AG 30
The AG 30 charging generator is a high-voltage unit that is used together with HAUG charging electrodes and a suitable counter-electrode. The charging electrode must be mounted at 10 to 30 mm above the material to be charged, exactly opposite the counter-electrode. When an earthed counter-electrode is used, it must be in contact with the material to be charged.
In order to obtain a constant and reliable charging, we strongly recommend that the materials, which are to be pinned together, be neutralized by means of an appropriate HAUG ionizing system before the charging process.
HAUG-Charging systems
HAUG charging systems are designed to apply electrostatic charges without physical contact. These systems can be used for any application where different materials are to be pinned together electrostatically. At least, one of these materials must be non-conductive. The electrostatic pinning serves to enhance subsequent processes, such as film/foil overlapping in packaging machines.
Special features and advantages
The AG 30 charging generator generates an adjustable high voltage of 40 kVDC. The device is available with either positive or negative polarity. Integrated measuring instruments show the voltage and the actual flowing current. High voltage and current threshold can be set with two different potentiometers. In the event that the flowing current exceeds the pre-set limit, an error signal is receivend and the high voltage is switched off.
The AG 30 charging generator can be set up for intermittent service by means of an external control.
An external signalling unit can be activated through the integrated signal connection.
Applications
HAUG charging systems can be used for:
- the pinning and positioning of film/foil, paper, and cardboard on different materials such as sheet steel, glass panels, wood sheets, and similar;
- the pinning of film/foil in packaging machines or in film/foil sealing machines;
- the pinning of film/foil in reversing winding systems, the pinning of film/foil reels in order to prevent the telescope effect, and the pinning of film/foil onto the cardboard tube, without any adhesive, at the start of film winding.
Technical data
| Types | AG 30 | 230 V positive 115 V positive | Order-No.: 09.7700.200 Order-No.: 09.7701.200 |
| AG 30 | 230 V negative 115 V negative | Order-No.: 09.7702.200 Order-No.: 09.7703.200 | |
| with analog display | |||
| AG 30 | 230 V positive 115 V positive | Order-No.: 09.7800.200 Order-No.: 09.7801.200 | |
| AG 30 | 230 V negative 115 V negative | Order-No.: 09.7802.200 Order-No.: 09.7803.200 | |
| with analog/digital display | |||
| Dimensions | 390 x 280 x 210 mm | ||
| Protection Type | IP 54 | ||
| Protection class | I | ||
| Supply voltage | 115 VAC / 230 VAC (50 – 60 Hz) | ||
| Power consumption | approx. 60 VA | ||
| Output-voltage | approx. 40 kVAC | ||
| Output short-circuit current charging | (lk) ≤ 4,5 mA | ||
| HV-terminals | 2 | ||
| Pulse frequency | 1 Hz, via floating normally open contact | ||
| Operating temperature | +5 °C to +45 °C | ||
| Storage/transport temperature | -15 °C to +60 °C | ||
| Weight | 13 kg | ||
| Mains cable | 2,6 m; fixed to the device | ||
Subject to technical changes!
Accessories
| Round plug | Order-No.: X-0616 | |
| Angled plug | Order-No.: X-5718 | |
| Signaling cable K1 shielded incl. Round plug | 5 m | Order-No.: 06.8941.000 |
| 10 m | Order-No.: 06.8941.001 | |
| 20 m | Order-No.: 06.8941.002 |
Download attachments: brochure operating instructions