Power pack EN SL

With his modular electronic components the EN SL power pack guarantees a service-friendly power supply.The EN SL power pack comes with two high-voltage connections and was designed to provide HAUG ionizing systems with the required voltage.

The integrated HV-transformer produces an alternating current of approx. 7 – 8 kV_AC. The main on/off switch with a build-in display light, always lets the user know that the power pack is ready for operation. The S-Line power pack works ideally with HAUG ionizing products, such as ionizing bars, air gates, ring ionizers etc.

Power pack EN SL LC

As EN SL, but with integrated full-electronic function monitoring. This system constantly monitors all functions of the ionizing system without any further measuring or test equipment. It alerts the operator of any irregularities by causing the LED indicator integrated in the housing to flash.

Power pack EN SL RLC

Identical in all technical aspects to the EN SL LC, the EN SL RLC power pack comes additionally with a signal socket above the earthing sleeve. A fault message can be connected to the signal socket.
The maximum contact load is 24 V_AC / 35 V_DC and max. 50 mA (see contact scheme and logic diagram).

	Operations status		Contacts closed
Normal operation	Supply voltage connected	High voltage connected	1 and 2
Failure	Supply voltage connected	High voltage failure	2 and 3
Failure	Supply voltage failure	not defined	2 and 3
In unit EN SL SD: Contacts 4. 5. 6 for reset and excess temperature switch-off identification.

Power pack EN SL SD (spark detect)

Design identical to power pack EN SL RLC. This power pack additionally monitors the following error states: spark-over, high-voltage short circuit and excess temperature. The signalling socket allows the power pack to be monitored and controlled.

Special features and advantages

The rounded edges of the S-Line housing prevent the operator from risks and injuries.
With help of the HAUG vario holder all S-Line power packs can easily be mounted horizontally on any flat surface or vertically right to the wall.
The S-Line power pack is manufactured in accordance to the DIN 0550 norm, protection type IP 54, protection class I.
HAUG’s patented plug-and-socket connection System X-2000 ensures the installation to be fast, simple and without the requirements of any tools.

Technical data

Types	EN SL	230 V 115 V	Order-No.: 01.7780.220 Order-No.: 01.7781.220
	with HAUG-transformer, output short-circuit current 3 mA, max. connectable length 10 m
	EN SL	230 V 115 V	Order-No.: 01.7830.000 Order-No.: 01.7830.000
	with HAUG-transformer and short-circuit protection unit, output short-circuit current 3 mA, max. connectable length 10 m
	EN SL II	230 V 115 V	Order-No.: 01.7782.225 Order-No.: 01.7783.225
	with potentiometer, adjustable 4...6 kV, max. connectable length 5 m.
	EN SL LC	230 V 115 V	Order-No.: 01.7833.000 Order-No.: 01.7834.000
	LED-controlled with function monitoring and short-circuit protection unit, output short-circuit current 5 mA, max. connectable length 10 m
	EN SL RLC	230 V 115 V	Order-No.: 01.7835.100 Order-No.: 01.7836.100
	Relay-LED-controlled with function monitoring and short-circuit protection unit, output short-circuit current 5 mA, max. connectable length 10 m. For use with signalling cable K6
	EN SL SD	230 V 115 V	Order-No.: 01.7843.000 Order-No.: 01.7844.000
	Relay-LED-controlled with extended function monitoring for sparking, HV short circuit and overheating with switch-off. Reset on unit by remote control, max. connectable length 10 m. For use with signalling cable K6
	Protection Type	IP 54
	Protection class	I
Supply voltage	115 V_AC / 230 V_AC (50 – 60 Hz)
Power consumption	approx. 50 VA
Output-voltage	approx. 7 – 8 kV_AC
Capacitiy of signalling contacts	24 V_AC / 35 V_DC max. 50 mA
HV-terminals	2
Operating temperature	+5 °C to +45 °C
Storage/transport temperature	-15 °C to +60 °C
Weight	approx. 3.5 kg
Mains cable	2.6 m; fixed to the device

Subject to technical changes!

Accessories

for EN SL II Signalling cable K3
for loss of high-voltage report, shielded, incl. signalling plug	5 m	Order-No.: 06.8960.000
	10 m	Order-No.: 06.8960.001
	20 m	Order-No.: 06.8960.002
Signalling plug		Order-No.: X-6099

for EN SL RLC / EN SL SD Signalling cable K6
for loss of high-voltage report, shielded, incl. signalling plug	5 m	Order-No.: 06.8976.000
	10 m	Order-No.: 06.8976.001
	20 m	Order-No.: 06.8976.002
Signalling plug		Order-No.: X-7807

Download attachments: brochure operating instructions